A small LCD display wired to a microcontroller, glowing on a desk

Training · IoT Security

IoT Fundamentals and Security

Build, attack and secure real IoT devices from home, with a hardware kit you order from us or build yourself.

  • Beginner+
  • 50 hours
  • About 9 weeks
  • Live online

About the course

IoT Fundamentals and Security is a hands-on course for anyone who wants to understand how connected devices work and how they are attacked. You program microcontrollers, connect sensors over several radios and send their data to real cloud platforms.

Every session follows the same rhythm. You build it, attack it, then secure it and test again. The hardware kit puts every lab on your own desk.

Who should attend

  • Students and fresh graduates in electronics, CS or IT
  • Diploma and ITI learners
  • IT and network staff moving into IoT security
  • Makers and hobbyists building connected devices

What the course covers

Six topics in focus

01

IoT architectures

Device, gateway, cloud and app, and where each is attacked.

02

Microcontrollers

ESP32 and RP2350 boards on Xtensa, Arm Cortex-M and RISC-V cores.

03

Hardware hacking

UART consoles, bus sniffing and SPI flash dumps.

04

Wireless protocols

Wi-Fi, BLE, Zigbee, Thread, Matter and LoRaWAN.

05

Cloud IoT

MQTT, CoAP and cloud platforms with X.509 device identity.

06

Secure by design

Secure boot, flash encryption, signed updates and IoT standards.

Tools and technologies

  • ESP32-C6
  • Raspberry Pi Pico 2 W
  • Logic analyser
  • Ghidra
  • Mosquitto
  • ChirpStack
  • EMBA

Course outline

6 modules, one capstone

  1. Module 1 IoT foundations Architectures, electronics for IoT, and your developer setup.
  2. Module 2 Microcontrollers and development ESP32 and RP2350, C and MicroPython, bootloaders and secure boot.
  3. Module 3 Hardware interfaces UART, I²C, SPI and JTAG, flash dumps and firmware basics.
  4. Module 4 Wireless protocols Wi-Fi, BLE, Zigbee, Thread, Matter and LoRaWAN.
  5. Module 5 IoT protocols and the cloud MQTT, CoAP, cloud platforms, device identity and updates.
  6. Module 6 Assurance and capstone Firmware analysis, IoT security standards and threat modelling.

Capstone

Build, attack, fix

Build a sensor-to-cloud device, swap designs with a partner to attack it, then fix the findings and show each attack failing.

Outcomes

You will be able to

  • Program and debug ESP32 and RP2350 boards
  • Sniff and dump hardware buses and flash
  • Build and secure Wi-Fi, BLE, Thread and LoRaWAN links
  • Connect devices to the cloud with least privilege
  • Apply secure boot, flash encryption and signed updates

Before you join

Prerequisites

  • Basic command line use
  • Prior programming in C or Python
  • Cyber Security 101 recommended, not required

Get the full syllabus

Batches start every month from January 2027. Send us an enquiry and we'll email you the detailed brochure and the next batch dates.